Cyclo Drive Reducer

Cycloidal pinwheel reducer can be a up-dated of brand-new type transmissing machine designed with K-H-V less teeth engagement and the cycloidal pin steering wheel clenching system, which are trusted in drive and minimizing of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical cranes, task machinery etc, Market and conveyors. various fields.

1. Gear is made from high durability low carbon alloy steel by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is followed for all gears, good call performance and with high precision
2. high transmission productivity: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light-weight, long service lifestyle and high bearing capability;
5. convenient to disassemble, assemble and check.

Operation specifications and precautions
1.High modularization design: many equip with various electric motor or other power input conveniently.Same machine type may equip with different power motor. It really is easy to realize the combination and
junction between every equipment type.
2.Transmission ratio: fine division, wide scope. The combined equipment type may form large transmission ratio, i.e. output suprisingly low rotary speed.
3.Form of installation: the position to be installed is not limited.
4.High strength, compact: the box body is constructed of huge strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and excellent grinding process, therefore the bearing capability of unitvolume is excessive.
5.Long life: Beneath the condition of right type chosen (including choosing ideal operation parameters)normal procedure and maintenance, the life span of main elements of speed reducer (except wearing parts) shouldn’t be less than 20000 hours. The putting on parts include lubricating bearing, oil seal and oil.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is certainly low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High speed ratio and efficiency
Single stage transmission can reach to 1 1:87 of speed-downwards ratio and the efficiency is definitely a lot more than 90%. If make use of multi-speed get the speed-down ratio is usually bigger.
2. Compact
Being adapted epicyclic transmitting basic principle, the input and productivity shaft are at same axis centre, it is compact.
3. Smooth and steady run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited at the minimum content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be obtained.The structure is easy, but it can realize high reduction ratio gadget.
2. Small gear clearance
The Drive, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are involved as well, and there are two gears engaged with 180 degree symmetry. As a result, the influence of tooth pitch error and cumulative tooth pitch mistake on the rotation accuracy is relatively average, which makes the position precision and rotation precision reach a very high level.
4. Less parts, convenient installation
The three basic components achieve a higher deceleration ratio, plus they are all on the same axis, so the kit is simple to install and easy to shape.
5. Small in size and light in weight
Compared with the previous gear device, the volume is 1/3, the fat is 1/2, but can obtain the same torque potential and reduction ratio, reaching small lightweight.
6 High torque capacity
Flexible wheel material USES special steel with huge fatigue strength.Different from ordinary transmission device, the quantity of teeth meshing accounts for in regards to 30% of the total number of teeth. In addition, it is in call with the surface, to ensure that the pressure borne by each equipment is reduced and great torque capability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the power loss due to friction. Therefore, high reduction ratio can be achieved while maintaining high efficiency, and miniaturization of driving motor could be realized.
8. Low noise
The gear meshing cycle velocity is low, the transmission movements force balance, therefore the procedure is quiet, and the vibration is quite small.
◆Excessive speed ratio and great efficiency single-stage transmission can achieve a deceleration ratio of 1 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission can be used, the deceleration ratio will get larger.
◆Because planetary transmission principle is adopted, the source shaft and end result shaft are on a single axis line, to ensure that the machine unit can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is larger, and the mechanism of balancing machine parts causes the vibration and voice limited to a minimum.
◆Reliable use and lengthy service life since the main parts are constructed with high carbon chromium steel, huge strength is obtained by quenching (HRC58-62), and rolling friction can be used in some transmission contacts, therefore the service life is lengthy.
Cycloid reducer is usually a cycloid needle teeth meshing planetary transmission principle drive models, is a perfect transmission has many advantages, versatile, and will be both positive and negative operation.

•Big ratio, and huge efficiency Smooth operation,

• low noise The usage of reliable,

• long life can reach 50000 hours

• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically zero wear, durable.

• Compact structure,

• small size Because the use of a planetary transmitting, the insight shaft and the result shaft on the same axis, making the model to obtain the smallest possible size.

• Reasonable design, easy protection, and break down easily install,

• the least number of parts together with simple lubrication, cycloid reducer trusted by the user.
(1)Size above PL/PF120(including)high torque products adopt integral double wall world pinion carrier, enhance the output strength and precision.

(2).Hoop clamp coupling have five connection methods well suited for different application environments.

(3).Size in this article PL/PF120(incorporating)precision and high strength integral inner gear housing, processed in one station,which eradicate the cumulative mistake and assembling error of split type.Get rid of casting process;adopt warm of forging process, that will reduce the blank material defects.

(4).The meshing gear adopt shaving method after carburizing and quenching,which easier to make gear surface smooth and high accuracy,reduce the temperature rising due to gear surface area gluing and friction.
This series worm-gear reducer was built after RV worm microreducer, that have a complete norm, wide speed for selection, and many mounting positions. Its overall performance and mounting dime nsions conform the same types of foreign.
The combination of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, low noise, radiate heat efficiently, compact structure and beautiful shape.
Great sealing and adaptability.Its combo with T gear reducer and MB/MBN variator can meet all sorts of speed requirement.