Bearing with a riveted stamped metal cage
Filled up with a polyalkylene glycol/ graphite mixture for lubrication
Running-in period required to distribute the lubricant within the bearing for applications that stand idle for an extended period
Not for wet or perhaps humid environments
Single-row, pre-lubricated, common accuracy.
Deep Groove Ball Bearings will be the most widely used rolling bearings. They are used to support radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and need little maintenance.
Chromium Metal (GCr15) made out of heat treating, provides excessive and uniform hardness, great wear resistance, and large contact fatigue performance.
Suitable for all sorts of professional equipment, micro motor, small rotary motor, office equipment and so forth.
Cages – Selection of cage types to fit your application needs: steel, sturdy brass or polymer
TOP QUALITY Steel – Ultra clean steel made to extend bearing life simply by up to 80%
Advanced Grease Technology – NSK lubricants made to extend grease existence and improve bearing performance
Very Finished Raceways – Specially honed to minimize noise and enhance the grease distribution
Patented Seals – Give a barrier to contamination in troublesome environments.
Electrically insulated ball bearings available
Outer diameters up to 2500 mm
This kind of ball bearing it often the most famous due to its versatility. They are well suited for high speeds and can handle a good radial load ability, all will very little maintenance required.
“Deep Groove” identifies the race (the groove where the balls relax). There is as a result a larger space between your inner and outer rings, compared to the diameter of the ball. This leaves space for the rubber seals.
The objective of a ball bearing is to determine the relative position of two parts (usually the shaft and the bearing casing) and to ensure their free rotation while transmitting the strain between them. At huge rotational speeds (for example in gyro ball bearings), this application can be extended to add free rotation without almost dress in in the bearings. To achieve this, the two elements of the bearing can be separated by a layer of adhesive fluid film named an elastic Deep Groove Ball Bearing china hydrodynamic lubricating film. pointed out that flexibility can be maintained not only when the bearing bears the load on the shaft, but as well when the bearing is normally preloaded in order that the positioning reliability and steadiness of the shaft does not surpass 1 microin or 1 nanoin. Hydrodynamic lubricating film.
Deep groove ball bearings mainly have radial load, but also can support radial and axial load. When the just radial loads, the get in touch with angle is zero.
When the deep groove ball bearings with a more substantial radial clearance, with angular speak to bearings can bear significant axial load, deep groove ball bearing friction coefficient is tiny, the speed limit is also high.
Solo row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most famous sizes of deep groove ball bearings happen to be also stated in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides happen to be lubricated forever and are maintenance free. A sealed bearings seals possesses contact on the bearings inner and external, a shielded bearings shield provides get in touch with on the outer just, and Shielded bearings will be primarily meant for applications where the inner ring rotates. If the outer ring rotates, you will find a risk that the grease will leak from the bearing at large speeds.
Double-row Deep Groove Ball Bearing possess deep uninterrupted raceways and excessive conformity between your 
balls and raceways.
They could carry axial loads acting in both directions furthermore to radial loads.Double row deep groove ball bearings are
very well suited for bearing arrangements where the load carrying capability of an individual row bearing is inadequate. For the same
exterior and bore diameters, dual row bearings are a little bit wider than solo row bearings but have considerably higher load
carrying capacity than sole row bearings in the 62 and 63 series.
EPT deep groove ball bearings for extreme temperatures correspond in style to standard single row deep groove ball bearings of the same size. They haven’t any filling slots and can accommodate normal axial loads furthermore to radial loads. The radial internal clearance can be a multiple of C5 to prevent the bearings from seizing, even when they cool speedily. All areas of the bearing and shields will be manganese phosphated to enhance adhesion of the lubricant to the steel and provide additional coverage against corrosion.