A chain and sprocket drive is 
a type of power transmission when a roller chain engages with two or more toothed wheels or sprockets, used in motors as a drivefrom crankshaft to camshaft.
Ever-vitality is proud to share a wide collection of Sprockets along with this huge variety of agriculture, gardening, preparing and outdoor items. We stand behind all 26,000 things we sell with our Satisfaction Guarantee. Customer Service is the cornerstone of our family business, and has been for over 50 years.
Application
Ever-power drive sprockets provide durable, reliable service and show replaceable tooth plates for easy field protection. Tooth plates for 102 and 142 series chain can be found with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL plus the 175 and 260 series use our nonsymmetrical profile.
Drive sprockets weren’t always designed to be bolted about. At one time these were welded onto the ultimate drive motor and had to be cut off if they were replaced. Finally, welded-on adapters were set up that allowed the sprocket to end up being bolted on, and newer designs use the bolted approach altogether.
When someone sends in your final drive motor for all of us to check out or?rebuild/reman, we advise them to remove the sprocket. We don’t require the sprocket in location to evaluate the motor and the added weight (which may be significant) unnecessarily heightens your shipping costs.
Signs of Sprocket Wear
The teeth on a drive sprocket are where you look for wear . They should be tall and smooth by the end, not sharpened or dished by the end. And the sprocket, and even more specifically its teeth, commence to wear, its size becomes smaller sized. This causes what’s referred to as a pitch mismatch, where the the teeth on the sprocket no more connect to the track backlinks as effectively. This can accelerate the wear of the sprocket and decrease the efficiency of your apparatus.
If your sprocket shows sign of excessive wear, then its time to replace it before it starts to cause abnormal track wear or starts to negatively affect the performance of your final drive motor.
Preventing Sprocket Wear
One of the key ways to prevent accelerated sprocket put on is to check on the track pressure. If the tension is too tight, it will cause don on the sprocket the teeth. We’ve talked before about the importance of keeping the undercarriage clean, and the health of the undercarriage can affect the track tension (especially if there is a build up of dried mud and debris). That’s portion of the chain sprocket reason we put so much emphasis on keeping the undercarriage clean
Conclusion
Without a functioning drive sprocket, your track drive won’t be able to propel your equipment. Fortunately, there are ways to help your travel sprocket go longer: keep the track tension at an effective level and continue to keep your undercarriage clean.
DRIVE SPROCKET
The undercarriage of your track equipment ought to be inspected regularly. If you discover early wear or harm to your tracks, a put on sprocket may be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the next Bobcat Compact Track Loaders: T180, T190, T550, T590
Parts can vary based on your serial number.
All Ever-electric power sprocket tooth profiles are induction hardened to 55 Rockwell C., and so are replaceable. The substitute and protection of tooth plate segments will not require removal of the drive shaft, bearings, etc. Ever-power also designs custom split hub pieces for retrofit applications that minimize discipline labor costs.
At initially glance, you might think that if you’ve seen one travel sprocket, you’ve seen all of them. However, Ever-vitality has added an I.D. lip and spiral band that captivate the needle bearing along with an exterior snap ring that improves performance and dependability. While simple to overlook, it’s this attention to fine detail that the racer possesses come to expect from Ever-power.
An We.D. lip and spiral band that captivate the needle bearing
Exterior snap ring caps sprocket on drum & increases durability
CNC-machined teeth include a corrosion-resistant finish
Specifics:
Chain Type: #219
Tooth Configuration: Standard