Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed electric fan motor china control switch. All of the wiring in the middle of your electric engine, capacitor and quickness control change is still hooked up nevertheless the cord itself is normally detached as seen in the photos. (Discover “Control Notice” below for modify type.)
T (See “App Notice” below for utilize in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” lengthy with a collection screw soft. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to the next).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take notice: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). These two types of switches both control the engine in the same way (but you possess a rotating knob and you have got a pull-chain). In the event that you order several engine at the same time, we will do our better to supply your purchase with each one sort of control or the excess.
Application Note: USUALLY DO NOT use this electric engine in a nonfan application. This is a completely enclosed fan electric electric motor and designed to have constant ventilation over the motor casing for cooling. The casing isn’t vented and the electric powered engine will overheat and enter automatic thermal overload if operate in a nonfan plan where there isn’t strong ventilation past the engine. (Caution Note: the electric motor will restart immediately when it cools cool off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans may possibly also overload the electric motor and cause it to proceed into automated thermal overload. (Your companion blade from another manufacturer may have a steeper blade angle.)
Origin: This electric motor is manufactured in China.