PIN coupling

What is pin bush coupling?
Industrial Pin Bush Coupling
The function of a flexible coupling is to transmit torque from on shaft to some other in cases where limited mis alignment might occur and to absorb shock loads.
We are one of the prominent businesses engaged in providing Pinbush Coupling that has highly developed rubberized compounds for use in bushes to soak up shock, tensional vibrations and minor misalignments. These couplings happen to be flexible in type and are generally of the cushioned travel type that is used for transmitting the torque through maximum tensile steel bolts to the device input. Moreover, these are simple and compact in construction that makes these capable of transmitting large torques at optimum speeds. These kind of couplings generally permit drive in either path and require neither lubrication, nor adjustment after fitting.

Pin and Bush Couplings
Vertical/horizontal mounting
Adsorbs vibrations
Progressive torsion springtime properties because of primarily pressurised bushings
Fail-safe in case of the failing of the bushings
Easy replacement of bushings without disassembly of the coupling halves
Maintenance free, no lubrication necessary
Declaration of conformity in accordance with ATEX 2014/34/EU possible
Typical applications
Pump drives
Belt drives
General mechanical engineering

Ever-electricity pin and bush coupling
Ever-power couplings contain a couple of resilient BARREL Shaped bushes with pins & nuts and two flanged hubs of graded cast iron.
The special BARREL shaped bushes permit the MISALIGNMENT IN ALL DIRECTIONS and give extra torsional flexibility in comparison with plain bushes.
These couplings are suitable for standard engineering application requiring reliable power transmitting even under conditions of shaft misalignments which are often unavoidable.

Ever-power couplings are being used when flexible compensating couplings in all applications requiring a reliable transmission of torque under harsh operating circumstances. The conical seats of the buffer pins facilitate installation and guarantee maintenance-free procedure. The optimized form of the barrelled buffers allows straightforward plug-in assembly and low circumferential backlash. Many type variants are offered, electronic. g. with brake disk, axial play limiting gadget, or brake engine couplings.
To the top of the page
Examples of application
Ever-power couplings are used on the whole mechanical engineering both when high-rate couplings and for excessive torques, e. g. in
Screw pumps
Cement processing machines7
To the most notable of the page
Advantages of the product
Flexible fail-secure pin and bush coupling for moderate up to high torques
Compact style; low weights and mass moments of inertia
Independent of path of rotation (suitable for reversing operation)
Suitable for plug-in assembly (blind assembly, bell housing installation)
Torque selection of the standard series between 200 Nm and 1,300,000 Nm
Can be used in potentially explosive atmospheres; certified acc. to 94/9/EC (ATEX 95)

Pin & Bush Couplings
Simple and almost indestructible, the pin and bush style is well suited for applications that involve safe practices, such as for example elevator drives or perhaps fire pumps. The fail-safe aspect of the design allows the coupling to end up being serviced at practical intervals, if the elastomer become damaged.
The elastomer elements reduce vibration and dampen impact loads, together with accommodate misalignment up to 0.5 degrees. The original bushing is certainly a neoprene elastomer with a graphite impregnated bronze sleeve. These are still available, as well as a contemporary version of the concept: urethane bushings.

Ever-power also manufactures many customized variations of this coupling including brake drum and shear pin type couplings.
Damping shaft coupling that can be utilized universally to compensate for shaft misalignment
Nominal torque range from TKN = 19 Nm up to 62,000 Nm with 23 sizes
Temperature range: from -50 °C to +100 °C

Robust and confirmed a million times
Due to their torsional overall flexibility, Ever-power couplings can move critical torsional vibrations from the operating region of mechanical equipment so that no negative effects on the drive train are to be expected. Ever-electrical power couplings are created from high-quality cast iron. The adaptable elements manufactured from synthetic rubber (Buna-N) are available in different degrees of hardness for most applications. Metallic pins and flexible elements are designed to ensure that no don occurs when they are properly fitted.

Your benefits at a glance
Fail-safe for maximum operational reliability
Three-part type well suited for plug-in assembly and simplified substitute of elements
Selection of elastomer hardness to suit various applications
Suitable for use in potentially explosive environments; certified according to
2014/34/EU (ATEX)
High degree of availability of parts ex stock

Established as an commercial standard, worldwide in use
Mining and Cement: heating technology
Coal and oil: pumps, fans, compressors, atmosphere condensers
Power Generation: pumps, enthusiasts, compressors, air condensers, water turbines
Chemical substances and Pharmaceuticals: driers, lauter tuns, pumps, supporters, compressors, mixers, agitators, reactors
Plastic and Rubber: solo- and double-screw extruders
Pulp and Paper: wastewater purification plants
Water and Wastewater: aerators
Meals and Beverage: lauter tuns, reactors, agitators, mixers

Did you know?
Original Ever-power elastomers ensure the perfect operation of one’s body. The flexible factors of the Ever-power coupling are subject to compression. If the versatile elements are irreparably harmed, the hub parts touch metal. This “emergency operation capability” is required, e.g., in the case of fire pump drives.