Synchronous Pulleys Synchronous Pulley components improve performance of motor-driven systems, increasing energy efficiency and decreasing maintenance costs. Synchronous drive enables adjustment of rate and torque while linking mechanically rotating components; belts and pulleys utilize teeth to avoid slippage and undesirable speed variations.
We offer three types of molded Synchronous Pulleys to meet up the low-cost needs in office automation products and space-saving automated equipment
Synchronous Pulley S (sintered metal)
Synchronous Pulley D (aluminum, zinc die cast)
Synchronous Pulley MT (resin injection)
Lightweight and cost-effective make use of in workplace and automated equipment
Description: These are toothed pulleys that transmit power through positive engagement between your pulley tooth and sprocket grooves instead of friction used in regular belts. They use the tooth-grip principle where square, circular, or modified curvilinear pulley tooth mesh with properly timed grooves on a drive for positive power transmission. Because the pulley maintains positive engagement with the generating gear sprocket, power tranny is smooth. For instance, you do not have to get worried about the pulley slipping over just how it happens with standard belt drives. Furthermore, the thin cross section of synchronous pulleys means that less energy is required to run it. On essential drives, utilizing a synchronous pulley that does not require retensioning can help to improve your systems energy effectiveness. It also helps to decrease downtime. This will help to increase the overall creation. Another benefit of using synchronous pulleys is that they allow your system to operate under varying speeds, loads, and frequent starts. Nevertheless, it is necessary to make sure that your machine is certainly maintained at best condition for optimal performance. If installed correctly, you are certain of high mechanical efficiency. Synchronous pulleys can deliver as high as 98% efficiency when installed correctly. This is higher than the normal V-belts that provide the average efficiency of 96%. Nevertheless, it is necessary to appreciate that synchronous pulleys aren’t ideal for all situations. If your production system was made to utilize the standard belts, changing to synchronous pulleys may need some adjustments. For that reason, you should consider engaging an expert before shifting to synchronous pulleys.
Ever-power’s SYNCHRONOUS pulleys are for sale to nearly every shaft diameter in relation to number of tooth as well regarding the profile chosen. They offer the option of non-positive or positive connections to the shaft utilizing a clamping screw, keyway or conical clamping sleeve. MISUMI offers timing pulleys in aluminium or metal versions.
Ever-power offers a big selection of various timing pulleys
From various materials: Aluminium, metal (1.1191/C45Electronic) and stainless (1.4301)
Different profile shapes (MXL, XL, L, H, GT, YU, T and AT)
With additional surface treatment: anodized, clear or black, chemically nickel-plated and burnished
In disc form ?Form A? and offset hub ?Form B?
With individually configurable shaft diameters for most sizes
Ever-power synchronous pulleys are manufactured from high quality iron (GG25), tolerate shock loading and achieve rim speeds of up to 40m/s. Available with pilot bore fixings or using the Ever-power shaft fixing system for ultimate versatility.
Available in both classical Timing and HTD profiles
Statically balanced to exceed grade G 6.3 (ISO 1940)
Rim boosts to a maximum of 40m/s
Blackened to reduce corrosion, acts as an ideal primer and eliminates the necessity for cleaning coating brokers prior to installation.
Precision machined grooves to protect and maximise belt existence whilst reducing noise
Ever-power mounting, for simple and quick installation
Special designs and sizes available
aluminium, anodized E6/EV1
Housing from profile 45 x 90
Sprocket galvanized steel, prepared for installation
maximum weight of the lifting door with paired insertion of the pulley, 34kg
weight = 0.340 kg/piece