The drag chain test made with our equipment certifies the cable capability of bending along the chain path
The movement patterns are run through the classic trapezoidal course profile for reflecting the stress put on the cable in the Customer’s application. The cable is subject to bending motion through trolleys that operate at high velocity on precision guides, driven by cogged belts. You’ll be able to check up to 4 chains at the same time with the same devices, with a pulling capability up to 3000 N
The test parameters (traversing distance, acceleration time, maximum speed and number of cycles) are adjustable and settable through a touchscreen panel. During the test routine, the cables are examined by an external measuring system: in case of cable break, the corresponding counter stops and the machine continues to operate and test the remaining samples until their final break (this program can be modified according to the requirements).
All characteristics could be personalized according to Consumer requests.
Our worm gear pieces cover a wide selection of applications. We demonstrate our years of experience and high level of capability by producing a lot more than 1 million worm gear pieces every year in-house, most of which are created according to custom specs.
Our catalog of worm equipment sets in line with the regular have diameters ranging from 20 to 135 mm and axial distances of 17 to 80 mm. Furthermore, you can expect custom worm gear units with diameters of up to 300 mm and middle distances of up to 210 mm.
The catalog of worm gear sets can generally be supplied (from our) warehouse in a broad selection of axial distances and gear ratios with fine degrees of differentiation. We can also calculate and generate customer-specific axial distances and gear ratios at the plant. We prefer to produce worm gear units for right-handed users, but these models can be created for left-handed users on demand.
We perform all major soft and hard machining steps in-house, including 
annealing inside our own ovens. Thanks to extensive production depth, we are able to execute, also highly complex, machining tasks exactly according to customer targets and in the best quality. Learn more about it here.
1. Transmission Chains
Power tranny chains are classified into six major groups.
1.1 Regular Roller Chains. These chains are created for general usage.
1.2 High Performance Chains. These chains have higher tensile power and greater fatigue power.
1.3 Lube-Totally free Chains. These chains have longer wear life than standard chains without lubrication.
1.4 Environmentally Resistant Chains. Chains with special corrosion resistance.
1.5 Specialty Chains, Type 1. For specific applications.
1.6 Specialty Chains, Type 2. For general designs.
Within these six groups, there are many types of chains available
For further information concerning transmission chain, do not think twice to call us