One reduction worm gearing offers high ratio reduction with few moving parts in a close-coupled compact drive. The right angle set up of driving-to-driven machine requires a the least space. Input and output shafts can be prolonged in either or both directions in horizontal or vertical plans adaptable to any mounting requirement. Efficient engine speeds are reduced to gradual speed requirements of several industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Face Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive use of the involute Helicoid Thread form (with departing side contact) on the worm and gear offers high efficiencies, and long service existence. The hardened surface and polished alloy metal worm develops a soft, work hardened surface area on the bronze gear. For this reason worm gears wear in and improve with extented service while various other gears are deteriorating. EP offers a broad collection of model configurations, sizes, ratios, and accessories from our standard product line.
Fabricated Designs
If the application involves severe shock loads or possible housing damage from external sources (as in steel mills or mobile products applications) EP can offer fabricated steel housings with up to 48″ center distances. Fabricated housings provide optimum rigidity and strength that allows the transmission of higher horsepower levels than are possible with regular cast iron products. Extra heavy aspect plates connect the worm and gear shaft bearing facilitates, assuring correct meshing of the apparatus under all load circumstances. In smaller sized sizes, fabricated metal reducers are interchangeable with EP standard cast iron reducers.
Custom Designs
EP can provide custom quickness and reversed engineered reducers for your application, be it a new project or a primary drop-in replacement for a competitor’s swiftness reducer. Fabricated steel reducers enable EP to match a competitor’s footprint, centerline, and shaft elevation allowing a primary drop-in substitute saving the customer time and money.
Long – Quiet Life
All worm gears in EP reducers are produced from phosphorous bronze. Our design also includes a hardened, ground and polished alloy steel worm. This combination develops a easy, work-hardened mating surface area of the bronze equipment which improves with prolonged service.
Worm gearing is a class of gear reducers that utilizes correct angle, nonintersecting shafts. This form of reducer provides easy and quiet operation and permits the possibility of large rate reductions. These gears can be found from stock in a wide selection of ratios, from only 4:1 up to 3600:1. The small design and structure allows worm equipment reducers to be positioned in a comparatively small space. Thus, very high reductions in a restricted package size may be accomplished with this configuration. Our worm gear features the constant sliding tooth actions between worm and one’s teeth. This increases the tolerance for large loads and shock loads. Worm gear drives offer users high reducing capacity for relatively low cost in comparison with various other types of gearing.
The use of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that make use of worm gearing are: conveyors, mixers and bucket elevators.
EP worm equipment reducer gearbox series base on years of experiences uses designed teeth surface area with unsurpassed torque transfer functionality with great efficiency, efficency and price.Worm gear system transmits power through sliding contact, leading to extremely low vibration , noise, small backlash and self-locking property
-Housing:One time we casting creats great rigidity for serious impacts. Outer cooling fins and inner lubrication oil diversion channel style to improve heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to ensure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one type of reduction gear package which includes a worm pinion input, an output worm equipment, and includes a right angle result orientation. This type of reduction gear package is normally used to take a rated motor swiftness and produce a low speed result with higher torque value based on the reduction ratio. They often times can resolve space-saving problems since the worm gear reducer is one of the sleekest reduction gearboxes available due to the small diameter of its result gear.
worm gear reducerWorm equipment reducers are also a favorite type of acceleration reducer because they offer the greatest speed decrease in the smallest package. With a high ratio of speed reduction and high torque output multiplier, it’s unsurprising that lots of power transmission systems make use of a worm equipment reducer. Some of the most common applications for worm gears can be found in tuning instruments, medical testing equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission offers two sizes of worm gear reducer, the SW-1 and the SW-5 and both are available in a variety of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are manufactured with tough compression-molded glass-fill up polyester housings for a durable, long lasting, light-weight speed reducer that’s also compact, non-corrosive, and nonmetallic.
Features
Our worm equipment reducers offer an option of a good or hollow result shaft and feature an adjustable mounting position. Both the SW-1 and the SW-5, however, can withstand shock loading better than other decrease gearbox designs, making them well suited for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Equipment Reducers also known as worm gearbox or worm velocity reducers. Worm equipment reducers are utilized for speed decrease and increasing the torque for electric engine drives. You can decide to mount your NEMA engine to the reducer by using the NEMA C encounter flange or make use of a coupling. If you need a coupling for the output or input shaft observe our coupling section for selecting a coupling. You can expect four assemblies left hand and right hand and double output shaft and shaft 
insight and shaft output. Interchangeable with most worm gear manufactures. Observe data sheet in product overview for diamensions. Unless you see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
EP DDVM series triple-reduction worm gear rate reducers can be found in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes available on request). Result torque ranges from 33,000 in pounds. for the 7” CD DDVM-70 to 582,900 in lbs for the DDVM-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are perfect for water/waste-water apparatus drive applications such as for example thickeners and clarifiers, which require a vertical down shaft. Other obtainable configurations also make EP triple reduction reducers perfect for use on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or other process or components handling systems where large torques/slower speeds are needed.
These reducers are also offered with a helical primary reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM as low as 0.01 with a 1750 RPM input.
Ideal for ultra-slow quickness, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are found in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers are available in direct or indirect drive, direct drive versions are 56C or 145TC flange install with either right, remaining or dual result shafts or a hollow bore output. The indirect drive models are shaft input-shaft output boxes for make use of with sprocket or pulley drive systems. They offer an effective low priced solution to speed decrease and improved torque, with higher tolerances for shock loading than helical gear reducers.
In order to select a gearbox speed reducer, you will have to determine the required torque and services factor for the application. Click on “Specifications” above for a desk that will aid in identifying the service factor. For service factors above 1.0, multiply the required torque by the provider factor.
Our regular 700 Series – the heart of EP swiftness reducer product line – has been serving industry reliably for over 40 years. Its verified modular style has set the sector standard for functionality and may be the most imitated item in today’s worm gear rate reducer marketplace. But why settle for a knock-off when you can have the initial – from EP.
Specifications
11 basic single reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility allows for installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, and also greater precision during worm and gear alignment.
EP 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings are available in our eCatalog.
TheIncreased Quality! Industrial Rated! Inexpensive!One-piece gearcase, without exterior ribs, is made of close-grained cast iron and provides for rigid equipment and bearing support. It also offers excellent high temperature dissipation.Dual lip, spring-loaded seals protect from oil leakage and stop dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater power.High tensile strength cast bronze worm wheel and hardened and surface alloy steel worm made intregal with the shaft for lengthy and trouble-free life.Oil sight gauge for simple maintenance (unavailable on sizes 25 and 34).Factory oil loaded.Every device test run just before shipment.Universal mounting with bolt-on foot.Highly modifiable design.All this at substantially reduce prices than you have already been accustomed to spending money on reducers of lesser quality. Less
Here are few more short articles associated to worm gear speed reducer which may interest you.